skip to main content

Remote LED Constant voltage (24VDC) and constant current (700mA) for the Illuma Range of LED products.

Constant Voltage Power Supplies: 
Illuma offer a range of constant voltage power supplies for their range of LED products that require a remote, separate power supply.

These are for LED products that have "on-board" circuitry to control the current delivered to the LED. The output supply required is a DC voltage and is 24VDC.

The current will vary (up to a given maximum) depending upon the load connected to the output of the power supply. 

The table below provides information on the type of power supply required for the given ranges and number of products that may be powered by a single power supply.

Constant Current LED Drivers:
Illuma offer a range of constant current drivers for their range of LED products that require a remote, separate driver. These are for LED products that do not have "on-board" circuitry to control the current delivered to the LED and this must therefore be controlled within the remote driver.

The output voltage will vary (up to a maximum) depending upon the load connected to the output of the driver whilst the current will remain constant.

The table below provides information on the type of power supply required for the given ranges and the number of products that may be powered by a single power supply.

Due to the delicate nature of such LEDs, care must be taken when selecting and initially connecting the drivers to the LEDs.

Voltage spikes, high inrush currents must be avoided if permanent damage is to be avoided. Full installation guidance and instruction is provided with the product.

All products carry the relevant product safety and performance approvals. 

Constant Voltage Power Supplies

 
Table indicates the maximum number of units that may be connected to the given driver/ power supply/ accessory
Constant Voltage DC Power Supplies
24VDC
Product Range
Power Supply
LEDPSU24030*
LEDPSU24060*
Marktrack LED (550lm) 5 8
Marktrack LED (900lm) 3 6
Pathfinder (380mm) 5 10
Pathfinder (680mm) 3 5
Via 10 30
Camino 10 30
Power Range (Watt) 30 60
Weight (kg) 0.125 0.35
Height (mm) 32 30
Width (mm) 41 52
Length (mm) 153 180
 Thicker cable required on longer runs to avoid voltage drop.

* Specification subject to change.

Constant Current LED Drivers

 
Table indicates the maximum number of units that may be connected to the given driver/ power supply/ accessory
Constant Current Splitter Boxes
700mA 700mA
Product Range
Power Supply
PSL06700*
PSL20700*
PSE2700(1000)*
PSE6700(1000)*
Project 50 LED 1 6 2 3-6
Power Range (Watt) 2-6 8-20 - -
Weight (kg) 0.35 0.69 0.01 0.02
Height (mm) 20 19 12 11
Width (mm) 35 45 12 32
Length (mm) 58 123 44 44

* Specification subject to change.